Skip to main content
Hilti
  1. Home
  2. Products
  3. Modular Support Systems
  4. Hot-dip galvanized products
  5. Heavy-duty channel system (MI)

Heavy-duty channel system (MI)

Hilti's strongest heavy-duty channel system – saving time and increasing productivity in various applications

All prices discounted net
Hilti's strongest heavy-duty channel system – saving time and increasing productivity in various applications
Filter Start Over
Product type
Base material type
45 Products
All prices discounted net
All prices discounted net

MI

Hot-dip galvanised (HDG) installation girders with greater adjustability for heavy-duty applications
  • Material composition: DD11 MOD – HN 555-4, S235JR – EN10025-2
  • Surface finish: Hot-dip galvanised, 75µm - DIN EN ISO 1461
From DKK 2.142,93

MIC-C90-DH

Hot-dip galvanised (HDG) bracket for heavy-duty connections to concrete
  • Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
  • Surface finish: HDG: min 55 µm
From DKK 1.788,85

MIC-C120-DH

Hot-dip galvanised (HDG) bracket for heavy-duty connections to concrete
  • Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
  • Surface finish: HDG: min 55 µm
From DKK 2.678,02

MIC-S90H

Hot-dip galvanised (HDG) bracket for heavy-duty connections to steel
  • Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
  • Surface finish: HDG: min 55 µm
From DKK 1.884,07

MIC-S120H

Hot-dip galvanised (HDG) bracket for heavy-duty connections to steel
  • Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
  • Surface finish: HDG: min 55 µm
From DKK 1.905,64

MIC-C-AA/-D

Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to concrete using two anchors
  • Weight: 3.49 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
DKK 477,13

MIC-C-DH

Connector (for concrete)
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From DKK 2.498,76

MIC-C-UH

Connector for fastening MI girders to concrete
  • Weight: 2.45 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
DKK 361,91

MIC-CU-MAH

Hot-dip galvanised (HDG) connector for fastening girders directly to concrete at angles between 0 and 180 degrees
  • Weight: 2.26 kg
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
DKK 1.433,28

MIC-S

Connector (steel)
  • Weight: 4.37 kg
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
DKK 1.198,24

MIC-SH Baseplate (for MI-90)

Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to steel for heavy-duty applications
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From DKK 1.829,56

MIC-SH Baseplate (for MI-120)

Hot-dip galvanised (HDG) baseplate for fastening MI-120 girders to steel for heavy-duty applications
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From DKK 2.349,48

MI-DGC

Hot-dip galvanised (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
  • Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From DKK 994,16

MI-SGC M12

Hot-dip galvanised (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams
  • Thread connection - M: M12
  • Weight: 0.36 kg
  • Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
DKK 1.599,36

MI-SGC M16

Hot-dip galvanised (HDG) single beam clamp for connecting MI steel baseplates to steel beams
  • Thread connection - M: M16
  • Weight: 0.51 kg
  • Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
DKK 1.379,51

AM threaded rod - Steel grade 4.8 (HDG)

Hot-dip galvanised (HDG) threaded rod with 4.8 steel grade
  • Material composition: Steel grade 4.8
  • Surface finish: Hot-dip galvanized
  • Base material type: n/a
From DKK 40,84

MIC-SC

Connector
  • Weight: 1.44 kg
  • Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
  • Surface finish: None (primer coating, basic connector)
DKK 544,90

MIC-E

Connector
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From DKK 1.721,44

MIC-UH

Standard hot-dip galvanised (HDG) connector for fastening MI girders to one another
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From DKK 433,75

MIC-BA /H

Ultimate hot-dip galvanised (HDG) connectors offering highest versatility within the MI modular system
  • Weight: 2.23 kg
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
From DKK 999,34

MIC-T

Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another
  • Weight: 2.2 kg
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
DKK 1.531,70

MIC-L

Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From DKK 856,66

MIC-U-MA

Hot-dip galvanised (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle
  • Weight: 2.63 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Tooth plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
DKK 913,60

MIC MAH

Connector (multi-angle)
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From DKK 1.757,54

MIA-EC

Girder end cap for safer and neater covering of MI and MIQ girder ends
  • Material composition: Moplen EP 240H
  • Temperature resistance: -30 - 90 °C
From DKK 807,00

MIC-MI/MQ M8

Connector
  • Weight: 0.06 kg
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt 45 µm - DIN EN ISO 1461
DKK 284,90

MIC-MI/MQ-X

Hot-dip galvanised (HDG) connector for fastening MQ strut channels perpendicular to MI girders
  • Weight: 0.36 kg
  • Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
  • Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 40 µm - DIN EN ISO 10684
DKK 2.278,40

MIA-EH

Easy hand screw
  • Material composition: Bolt: 8.8 grade steel; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From DKK 436,60

MIA-EH-P

Hot-dip galvanised (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors
  • Weight: 0.29 kg
  • Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; spring: 1.4319 AISI 302, 1.4310 DIN EN 10088
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
DKK 534,20

MIA-OH

Hot-dip galvanised (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
  • Material composition: Steel grade 8.8
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
  • Tightening torque: 84 Nm
From DKK 280,70

MIA-TP

Hot-dip galvanised (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
  • Weight: 0.06 kg
  • Material composition: S235 - EN 10025-2
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
DKK 366,00

M12-F

Hot-dip galvanised (HDG) hexagon bolt used in various applications
  • Thread - M: M12
  • Material composition: Steel grade 8.8
  • Surface finish: Hot-dip galvanized, 45 µm
From DKK 741,08

M12-F-SL-WS 3/4"

Prevailing torque hex nut
  • Weight: 0.02 kg
  • Material composition: Steel grade 8
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
DKK 894,77

MI-DPR

Hot-dip galvanised (HDG) connector fixed to the MI girder to accommodate pipe expansion in heavy-duty applications
  • Weight: 3.37 kg
  • Material composition: Body: S235JRG-2 - DIN EN 10025; roller: E295 (St50); axle: stainless steel 1.4541; bearing: PTFE
  • Surface finish: Hot-dip galvanized
DKK 2.385,62

MIC-PS/MIC-PSP

Hot-dip galvanised (HDG) connector for fastening pipe shoes to MI girders for heavy-duty applications with expansion
  • Material composition: U-bolt: Steel grade 8.8; Plate: DD11 MOD - HN 547, S235JR - DIN EN 10025; Nut: Steel grade 8
  • Surface finish: HDG: U-bolt, nut 45 µm - DIN EN ISO 1461; plate: 55 µm - DIN EN ISO 1461
From DKK 73,90

MIC-TRC

Hot-dip galvanised (HDG) connector for fastening M12 (1/2") and M20 (3/4") threaded rods to MI girders
  • Material composition: Connector, Square washer: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector, Square washer 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 69 Nm
From DKK 303,38

MIC-TRC

Hot-dip galvanised (HDG) connector for fastening (M16) threaded rods to MI girders
  • Thread connection - M: M16
  • Weight: 0.9 kg
  • Material composition: Connector, Square washer: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
DKK 273,86

MI-UB

U-bolt
  • Material composition: U-bolt: DD11 MOD - HN 547, S235JR - DIN EN 10025; nut: 8 grade steel; washer: DIN EN ISO 7093-1-200HV
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
From DKK 670,85

MIC-UB

U-bolt connector
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Washer: DIN EN ISO 7089; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: connector, square washer 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
  • Wrench size: 19 mm
From DKK 898,32

MIA-BO

Hot-dip galvanised (HDG) U-bolt for fastening pipe shoes to MI girders
  • Material composition: U-bolt: Steel grade 8.8 - ISO 898-1; Nut: Steel grade 8
  • Surface finish: HDG: 48 µm - DIN EN ISO 10684
  • Tightening torque: 84 Nm
From DKK 897,84

MIC-PG

Insert to reduce friction when fastening pipe shoes and U-bolts to MI girders
  • Weight: 0.02 kg
  • Material composition: Plate: PE-UH MW; Anchor: PA
  • Temperature resistance: -200 - 90 °C
DKK 637,10

MRG 2,0-F

Premium hot-dip galvanised (HDG) roll connector for medium-duty heating and refrigeration applications
  • Thread connection - M: M10, M12
  • Height - H: 31 mm
  • Maximum load - F: 1.5 kN
DKK 5.845,85

MRG-D6-F

Premium hot-dip galvanised (HDG) double roll connector for heavy-duty heating and refrigeration applications
  • Thread connection - M: M12, M16
  • Height - H: 36 mm
  • Maximum load - F: 6 kN
DKK 11.392,80

HDG grade 8 hexagon nut DIN 934

Hot-dip galvanised (HDG) grade 8 hexagon nut corresponding to DIN 934
  • Material composition: Steel grade 8
  • Surface finish: Hot-dip galvanized - DIN EN ISO 10684
  • Base material type: n/a
From DKK 65,20

Round coupling nut

Hot-dip galvanised (HDG) coupling nut for extending threaded rods
  • Material composition: Steel grade 4.6
  • Surface finish: Hot-dip galvanized
  • Base material type: n/a
From DKK 357,52
Back to products ()
Compare
Products ()
Log in to proceed
Register now
Contact us
Contact
Call us
Call us
You can reach us on:
44 88 80 80
Customer Service hours of operation:
Let us call you back
Request call-back
Call back currently not available

We can call you during our business hours:
8:00 AM - 6:00 PM

Mon 8:00 AM - 3:00 PM CEST
Tue 8:00 AM - 3:00 PM CEST
Wed 8:00 AM - 3:00 PM CEST
Thu 8:00 AM - 3:00 PM CEST
Fri 8:00 AM - 3:00 PM CEST
Live chat with us
Chat with us
Live chat currently not available

You can reach our live chat during business hours:

Mon 8:00 AM - 3:00 PM CEST
Tue 8:00 AM - 3:00 PM CEST
Wed 8:00 AM - 3:00 PM CEST
Thu 8:00 AM - 3:00 PM CEST
Fri 8:00 AM - 3:00 PM CEST
Send us a message
Send us a message
Please send us your request using this form.
* Required fields
You will receive a copy of your message in your inbox.
* Required fields
Looking for a Hilti Store? Find a Hilti Store
Added to cart
Added to cart
Go to shopping cart

Hilti = registered trademark of Hilti Corporation, 9494 Schaan, Liechtenstein
© 2009-2016, Right of technical and program changes reserved, S.E. & O.

Hilti Danmark A/S
Customer Services: 44 88 80 80

General information and delivery times More information