The sound pressure and vibration values given in these instructions have been measured in accordance with a standardized test and may be used to compare one gasoline-powered saw with another. They may be used for a preliminary assessment of exposure.
The data given represents the main applications of the machine. However, if the machine is used for different applications, with different accessory tools or is poorly maintained, the data may vary. This may significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the machine is switched off, or when it is running but not actually being used for a job. This may significantly reduce exposure over the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for example: Maintaining the machine and accessory tools, keeping the hands warm and organizing work patterns.
Noise emission values
|
DSH 600
|
DSH 600-X
|
Sound pressure level (Lpa,eq)
|
102 dB(A)
|
102 dB(A)
|
Uncertainty
|
3.0 dB(A)
|
3.0 dB(A)
|
Measured sound power level (Lwa)
|
113 dB(A)
|
113 dB(A)
|
Uncertainty
|
2.2 dB(A)
|
2.2 dB(A)
|
Guaranteed sound power level (Lwa)
|
115 dB(A)
|
115 dB(A)
|
Total vibrationThe sound pressure level and the vibration values were determined allowing for 1/7 no-load operation and 6/7 full-load operation.
|
DSH 600
|
DSH 600-X
|
Vibration value at grip, front (ahv,eq)
|
≤ 2.5 m/s²
|
≤ 2.5 m/s²
|
Uncertainty
|
1.3 m/s²
|
1.3 m/s²
|
Vibration value at grip, rear (ahv,eq)
|
≤ 2.5 m/s²
|
≤ 2.5 m/s²
|
Uncertainty
|
1.3 m/s²
|
1.3 m/s²
|