All prices discounted net
Galvanised threaded rod with 4.8 steel grade
- Material composition: Steel grade 4.8 - DIN 976-1
- Surface finish: Galvanized
From
DKK 10,90
Galvanised pre-cut lengths of threaded rod with 4.6 steel grade
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
From
DKK 57,62
Galvanised grade 8 hexagon nut corresponding to DIN 934
- Material composition: Steel grade 8
- Surface finish: Galvanized
From
DKK 29,67
Galvanised hex nut with flange corresponding to DIN 6923 8
- Material composition: Steel grade 8
- Surface finish: Galvanized
From
DKK 192,44
Galvanised flat washer corresponding to ISO 7089
- Material composition: Steel - DIN EN ISO 7089
- Surface finish: Galvanized
From
DKK 39,59
Galvanised flat washer corresponding to ISO 7093 used in various applications
- Material composition: Steel - DIN EN ISO 7093-1
- Surface finish: Galvanized
- Inside diameter - DI: 13 mm
DKK 96,31
Galvanised flat washer similar to ISO 7089
- Material composition: Steel
- Surface finish: Galvanized
- Load range: Medium-duty
From
DKK 68,98
Galvanised hexagon screw corresponding to DIN 933
- Material composition: Steel grade 8.8
- Surface finish: Galvanized
- Load range: Medium-duty
From
DKK 46,91
Hot-dip galvanised (HDG) threaded rod with 4.8 steel grade
- Material composition: Steel grade 4.8
- Surface finish: Hot-dip galvanized
- Base material type: n/a
From
DKK 42,88
Hot-dip galvanised (HDG) grade 8 hexagon nut corresponding to DIN 934
- Material composition: Steel grade 8
- Surface finish: Hot-dip galvanized - DIN EN ISO 10684
- Base material type: n/a
From
DKK 68,46
Hot-dip galvanised (HDG) flat washer corresponding to ISO 7089
- Material composition: Steel - DIN EN ISO 7089
- Surface finish: Hot-dip galvanized
From
DKK 80,09
Hot-dip galvanised (HDG) flat washer corresponding to ISO 7093 used in various applications
- Material composition: Steel - DIN EN ISO 7093-1
- Surface finish: Hot-dip galvanized
From
DKK 92,46
Stainless steel (A2) hexagon nut corresponding to DIN 934
- Required material grade: A2
- Material composition: Stainless steel A2-70
- Surface finish: Stainless steel
From
DKK 124,96
Stainless steel (A4) hexagon nut corresponding to DIN 934
- Required material grade: A2, A4
- Material composition: Stainless steel A4-70
- Surface finish: Stainless steel
From
DKK 195,19
Stainless steel (A2) flat washer corresponding to ISO 7089
- Required material grade: A2
- Material composition: Stainless steel A2 – DIN EN ISO 7089
- Surface finish: Stainless steel
From
DKK 87,41
Stainless steel (A4) flat washer corresponding to ISO 7089
- Required material grade: A2, A4
- Material composition: Stainless steel A4 – DIN EN ISO 7089
- Surface finish: Stainless steel
From
DKK 31,91
Stainless steel (A4) flat washer corresponding to ISO 7093 used in various applications
- Required material grade: A2, A4
- Material composition: Stainless steel A4 – DIN EN ISO 7093-1
- Surface finish: Stainless steel
From
DKK 198,91
Stainless steel (A4) flat washer similar to ISO 7089 used in various applications
- Required material grade: A2, A4
- Material composition: Stainless steel A4
- Surface finish: Stainless steel
DKK 236,43
Stainless steel (A4) hexagon screw corresponding to DIN 933
- Required material grade: A4
- Material composition: Stainless steel A4-70 - DIN EN ISO 3506-1
- Surface finish: Stainless steel
From
DKK 221,32
Hot-dip galvanised (HDG) hexagon screw corresponding to DIN 933
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized
- Load range: Medium-duty
From
DKK 125,26
Galvanised thread adapters to connect various internal and external thread diameters
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
From
DKK 30,11
Galvanised threaded pipe with 4.6 steel grade used as an accessory for various applications
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
- Length - L: 2000 mm
From
DKK 527,27
Hot-dip galvanised (HDG) threaded pipe with 4.8 steel grade used as an accessory for various applications
- Thread - M: 1-1/4 in
- Material composition: Steel grade 4.6
- Surface finish: Hot-dip galvanized
DKK 3.750,18
Galvanised hanger bolt with steel grade 4.6 and Torx head
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
From
DKK 65,87
Hot-dip galvanised (HDG) hexagon bolt used in various applications
- Thread - M: M12
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized, 45 µm
From
DKK 778,13
Galvanised pipe hangers
- Material composition: Malleable cast iron
- Surface finish: Galvanized
- Diameter - D: 12 mm
From
DKK 558,45
Galvanised hexagonal coupling nut for extending threaded rods
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
From
DKK 312,37
Stainless steel (A4) coupling nut for extending threaded rods
- Thread - M: M10
- Required material grade: A2, A4
- Material composition: Stainless steel A4-70
DKK 594,33
Hot-dip galvanised (HDG) coupling nut for extending threaded rods
- Material composition: Steel grade 4.6
- Surface finish: Hot-dip galvanized
- Base material type: n/a
From
DKK 375,40
Galvanised reduction sleeves used to reduce the diameter of threaded rods
- Material composition: Steel
- Surface finish: Galvanized
- Outside thread - MA: M16
From
DKK 726,87
Galvanised angles to increase stiffness while supporting pipe rings in riser shafts
- Material composition: S235JR - DIN EN 10025
- Surface finish: Galvanized
- Weight: 99 g
DKK 585,90
Galvanised heavy-duty pivot anchor for M8 threaded rods
- Material composition: Carbon steel
- Surface finish: Galvanized
- Thread length - L: 100 mm
DKK 833,70
Locking washer with zinc flake coating to withstand 480h neutral salt spray testing according ISO 9227 (similar to hot-dip galvanization)
- Material composition: Steel C 60 - DIN EN 10132-3
- Surface finish: Zinc flake
- Inside diameter - DI: 16.4 mm
DKK 679,06
Galvanised pivot anchors for use in trapezoidal metal sheets
- Material composition: Carbon steel
- Surface finish: Galvanized
- Base material type: Trapezoidal sheet
From
DKK 706,83
Galvanised pipe ring saddle adapter for converting the diameter of threaded rods
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
- Outside thread - MA: M12
From
DKK 630,98
Stainless steel (A4) pipe ring saddle adapter for converting the diameter of threaded rods
- Required material grade: A4
- Material composition: Stainless steel, 1.4401 (A4) - EN 10088, AISI 316
- Surface finish: Stainless steel
From
DKK 4.485,60
Galvanised adapter for the use with MP-U-I and MP-U pipe clamps
- Thread - M: M16
- Material composition: Steel 11SMnPb30 – DIN EN 10277-3
- Surface finish: Galvanized
From
DKK 399,00
Tool to easily cut threaded rods of various diameters
- Material composition: Steel
- Surface finish: Painted
From
DKK 1.321,28
